Water Softener Maintenance Best Water Softener Guide

Water Softener Maintenance

Home water softening systems are a worthwhile, yet sometimes costly, purchase. It can mean great benefits for your home and your family. In order to receive the best benefits from water softeners, it is important that you keep it in good condition. Most systems require very little maintenance, but if they are not properly kept up big problems can occur.


Bridging occurs when the water softener has gone through multiple cleaning cycles and has dissolved all of the salt in the bottom of the brine tank. What is left is a “bridge” of hard salt above the water line.

When the softener goes through a part of regeneration known as the ‘brine draw’, instead of getting a strong sodium chloride solution, it gets straight water. You don’t want this to happen. In order to fix it, you have to physically break apart the tough bridge until it falls into the water below.


When salt is not properly cleaned from a brine tank, clumping can occur. The left over salt begins to clump into gooey masses inside the brine tank. It can take some serious work to get these out. When clumping gets really bad, the water level inside the tank can rise and slip out onto the floor.

Water Softener Maintenance

Maintaining Your Water Softener

Most water softener systems require very little maintenance. It is mainly a matter of making sure nothing goes wrong and preventing potential issues. Below you will find a few simply ways you can make sure that you are maintaining your home water softening system to its full potential.

Read the manual:

This seems obvious, but manuals are often overlooked. Learn the details about your specific model and what it needs to properly function. If given, follow included directions for installation and cleaning. Water systems come in a variety of models and sizes, it is important you know what works best for yours.

Check salt levels:

Salt is an essential part of most tradition water softeners. It regenerates the resin beads to prepare them for more softening. Without salt, the beads would remain ineffective. Be sure you are adding salt to your system regularly and it has the correct amount it needs for your water to remain soft.

Also, be sure you are adding the correct type of salt. Check back to the user manual to see what specific type of salt is needed for you model.

Keep it clean:

You should conduct a regular inspection of your water softening system every 2-3 months. You will want to look for problems inside the brine tank, specifically a solid build-up of salt. Bridging can cause serious problems for your tank and water. You want the salt to come in contact with the salt and keep your water soft. Be sure to break those up bridges when they occur.

However, the occurrence of a bridge means that it is time to give your system a thorough cleaning, or else the bridges will reoccur at a much faster rate. Cleaning should take place every 6-8 months depending on the model and age of your system.

Again, the systems do not require much maintenance, but these small steps can ensure last results and quality water. For More Info. Visit Best Water Softener Guide

Posted by Petrick D'souza

Leave a Reply